HOME BIG RIG TRAILERS BIG RIG SKIDS BIG RIG ELECTRIC KODIAK PARTS USED EQUIPMENT CONTACT US
 
 
And why our customers consistently rate our equipment.
"Top of the line"

We want to build customers for life….to succeed at this we have to do our best and stay focused on the long term.
Our equipment is designed to last and provide years of profitable use. Very little effort is required by you to maintain this equipment so you can spend your time spraying, or better yet doing something fun, instead of working on your machine.
We make only hydraulic controlled spray rigs, which provide infinite control of mixing speed and pump speed at your finger tips. This makes mixing a snap and adjusting your spray pattern easy. There are no transmissions or clutches to hassle with. That’s not the only good news, the cost of maintenance for our hydraulic machines is a fraction of the cost of mechanical machines. Customers that switch to our hydraulic machine love the ease of use and low maintenance.
  • Heavy Duty Construction:
    Our tube frame welded construction is designed to handle heavy loads so you can tow with mud in the tank. You will not find that on other machines. Our frame doubles as the air tank. All air tank frame welds are air pressure tested to verify quality welds. It takes longer to make a tubular steel frame, but it is the best and that’s why we do it. Motor plates are 3/8” thick steel to handle the vibrations of a hard working spray rig. You will not see the benefits of this until you have owned the rig for 5 or ten years, when other rigs crack and fail, yours will keep on working.
  • Low Maintenance Wheels and Axles:
    Our axles have Independent suspension Torsion arms with no springs. These are high end axles. You will never have to fix broken springs or shackles again. All rigs are equipped with
    bearing buddies that allow you to service the axle bearings with out removing the wheels.



  • Hose:
    Our material hose is high performance and rated at 3200lb. burst so you won’t have to deal with the safety risks and mess of a bursting hose full of mud. Most other brands sell their rigs with low pressure material hose designed for air line. Our hose costs us more but the benefits are too important to cut corners.
  • Texture Strainer:
    A stainless steel texture strainer is standard on all of our rigs. This feature strains the mud to catch lumps before they can be sprayed on the wall. General contractors and home buyers want smooth patterns and you don’t want to deal with complaints and rework.
  • Stainless Tanks:
    Our tank, lid, hinge and mixing paddles are
    stainless steel so you do not have to deal with rust in your mud. The paddles are a solid stainless steel welded construction and won’t break like aluminum paddles and come with heavy duty adjustable tank wipers. Our tanks are welded inside and out to handle the vibration and flexing that occurs when mixing and towing.
  • Attention to Detail:
    Tow chains and hooks are heavy duty and come with spring loaded safety clips to keep the chain attached to the tow vehicle. It’s a small thing but it makes a big difference when you deal with it every day. Wire connections are made with heat shrink connectors and secured with heat shrink tubing. These connections will handle the vibrations of a spray rig. It will be a very long time before you have to deal with broken connectors or tow chains.
  • Spray Guns:
    Our rigs come with American Spray’s special pole gun with hardened steel tips that last a long time and require less air so you can get better spray patterns.
  • Easy Service:
    Oil filters and drains are easy to reach. You can service this machine in minutes. Our hydraulic system has two filters to keep the oil clean. One is permanent and the other is replaceable.
  • Butterfly Valve at Pump:
    Wouldn’t it be great to replace your stator tube with a full tank of mud and not leave half of it on the ground! We have that breakthrough solution today. Our new stainless steel pump housing has a butterfly valve built in. It is offered as a standard item on our Diesel rigs and an option on our Kohler gas rigs. The butterfly valve
    feature is a life saver when having to service your pump. Simply close the valve to the tank and the pump can be serviced with ease.
    		•






    © 2005 American Spray Technologies



    150 Gas

    200 Gas

    270 Gas

    350 Gas

    270 Diesel

    350 Diesel

    420 Diesel

    Single Skid

    2 Skids

    Truck Mount

    Gas

    Diesel

    Gas

    Diesel

    Custom

    Custom 420

    Custom 700

    Introduction

    150 to 500 gallon

    Custom Electric