Log In

Log In

Forgot Your Password?

Cart Subtotal: $0.00

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3
Set Ascending Direction

Depending on the job requirements and specifications, different finishes and techniques may need to be applied when texturing drywall. To help contractors in the industry better understand the requirements of architects and building owners in order to enhance the satisfaction of the client, the consensus document ‘Recommended Levels of Gypsum Board Finish’ was created by five major trade associations: The Association of Wall and Ceiling Industries International (AWCI),the Drywall Finishing Council (DWFC), the Ceilings and Interior Systems Construction Association (CISCA), the Painting and Decorating Contractors of America (PDCA), and Gypsum Association (GA). The purpose of the document was to accurately describe the desired finish of walls and ceilings prior to final decoration. This also helped promote competitive job bidding that allows the bidder to consider the correct labor and materials to finish the wall suitably for its final decoration.

To refresh your memory, in this blog, we are going to briefly summarize the different levels of drywall finishing.

Level 0

No taping, finishing, or accessories are required for the job. This level of finish may be useful in temporary construction or whenever the final decoration has been yet to be determined.

Level 1

This level of finishing only requires a single coat with taping set in joint compound on all joints and interior angles. This level is typically specified for jobs in smoke barrier applications, plenum areas above ceilings, in attics, in building service corridors and other areas where the assembly would generally be concealed or in, and other areas not normally open to public view. Although it is not much, there is some degree of sound and smoke control is provided.

Level 2

This level involves a double coating of joint compound over all joints, interior angles, fastener heads, and accessories. This finishing level is commonly used for non-finished areas and areas where gypsum panel products are used as a substrate for tile. Examples of application locations include warehouse storage, garages, and other similar areas where surface appearance is not a concern.

Level 3

This finish requires that all joints and interior angles have tape embedded in joint compound with one thin coat applied over them, plus two coats of joint compound on fastener heads and accessories. This results in a smooth, ridge- and mark-free surface that is ideal for residential interiors and similar areas which are to receive medium to heavy texture (spray or hand applied) finishes before the application of paint, or where heavy-grade wall coverings are to be applied as the final decoration. Keep in mind, this finish is not recommended where smooth painted surfaces or light to medium wall coverings are listed as job specifications.

Level 4

Drywall contractors applying this level will have tape embedded in joint compound with two separate coats of joint compound covering all flat joints and one separate coat of joint compound applied over the interior angles. Three coats of joint compound should be applied to fastener heads and other accessories. This level is most common in applications where flat paints, light textures, or wall coverings are to be applied. There are some paints that are not recommended for this finish, including gloss, semi-gloss, and enamel paints.

Level 5

This level requires that all joints and interior angles have tape embedded in joint compound, with and two separate coats of joint compound over all of the flat joints, and one separate coat of joint compound applied over the interior angles. Like level four, all fastener heads and accessories should be covered with three separate coats of joint compound. Also, a thin coat of joint compound needs to be applied to the entire surface. This level is typically recommended where gloss, semi-gloss, enamel, or non-textured flat paints are specified or where severe lighting conditions occur. Out of all the finishes, this is of the highest quality and is the most effective for applying a uniform surface and minimize the possibility of joint photographing and of fasteners showing through the final decoration.

There you have it, the different levels of drywall finishes. These are important to keep in mind, especially for jobs that have certain specifications. While these textures can be applied by hand, it is definitely easier and more efficient to use a texture sprayer.

At American Spray Technologies, our family our texture spray rigs are ideal for drywall contractors that need durability and dependability. All of our texture spray rigs, including the notorious portable texture spray machine, the Kodiak M2, can handle a wide range of tip sizes, longer hose lengths, and heavier coatings with ease. AST drywall texture rigs will reduce your job time and make spraying a breeze with powerful, reliable performance time after time.

If you are interested in figuring out what the best texture spray rig is for your applications, check out our helpful guide. To request a quote for a texture spray rig, contact us!

Posted in American Spray Technologies By marketing 360

As a drywall texturing contractor, the amount of bids you win for projects and the quality of your work plays a significant role in how successful and profitable your business is. When bidding on projects, if you are like many contractors in the industry, you likely will gravitate towards larger commercial construction projects, as long as you have the time, equipment, and resources that is.

While commercial drywall texturing projects can be time-consuming, they tend to always have a higher payoff. In a competitive industry as such, it is crucial that drywall contractors take on profitable projects that will allow them to apply texture quickly without sacrificing craft and workmanship. But, unfortunately with commercial projects, that is easier said than done. As a drywall contractor, if you plan on taking on larger commercial jobs, it is important that you take steps to make your work as effective and efficient as possible.

Time-Saving Commercial Drywall Texturing Tips

Most commercial projects that require drywall texturing will have more than one room. Jobs texturing business offices and complexes, apartment buildings, and other large building structures are certainly going to take some time. For that reason, it is important to do whatever you can to finish the job quickly, but with quality workmanship to increase the chances of bringing in more jobs down the road. Below, check out some time-saving tips that will be helpful when texturing for commercial projects.

Break The Work Into Sections

For commercial buildings that need texturing, especially those with numerous rooms and floors, the job simply cannot be done in one-day with the expected professional results. Rather than trying to tackle the workload all at once, it can help to break the work into different sections. For example, if you are hired to perform texturing inside a four-story apartment building there may be hundreds or rooms or areas that need spraying. To make the work loader, you may consider breaking the work into sections; spraying the first and second floor one day, the third and the fourth the next, and finishing up any other areas as needed. While it may not seem like it, dividing your work load into sections can make the work easier and more efficient, plus it often comes with better results.

Properly Mix Your Drywall Material

Preparing the drywall spray material is a time-consuming process itself. No matter which type of material you are using, you must mix the material and thin it until the proper consistency is attained. Failing to do so will lead to wasted time and less-than-optimal texturing results. To properly mix your material and achieve the right consistency, you must have the proper mixing tools, frequently test the material’s consistency, and mix it frequently. In addition to properly applying the texture, properly mixing the material is just as, if not more, important for the best application results.

Use A Quality Texture Spray Machine

The tools and equipment used in drywall texturing have a significant influence on the quality of work. When it comes to saving time, one of the best pieces of equipment your drywall contracting business can invest in is a quality drywall texture sprayer. Believe it or not, there are a lot of texturing machines out there, all offering different qualities for different applications. Therefore, it is important to know how to choose the best texture spray rig for your business. Consider which materials you use most, how many gallons are used for typical applications, and the surfaces you most often spray to get a better idea of which texture spray rig is best for your needs.

For interior jobs, such as spraying inside commercial buildings, having a portable texture spray machine that is compact and easy to move around the job site is a vital component to saving time on jobs. At the same time, however, you want a spray rig that still packs some spraying power. Typically most portable texture sprayers offer one or the other, but never both. The Kodiak texture sprayer from American Spray Technologies has changed that. For the past two decades, the Kodiak Texture Sprayer has been a popular choice for drywall texturing professionals that are in need of a compact, easy to maneuver, texture spray machine. Designed to give you years of reliable performance and features such as increased hopper capacity, durability, and easy clean-up, this portable spray rig can be used for a variety of applications and materials and can help you save time and complete projects quicker.

By following these tips, you should be able to complete larger commercial texturing jobs faster, without sacrificing the quality of work your business has become known for. If you are interested in learning more about the Kodiak M2 spray rig and how it can benefit your business, contact the specialists at American Spray Technologies today!

Posted in American Spray Technologies By marketing 360

We are moving!

May 16, 2019 10:50:06 AM

We have a new address!

 

1420 20th St NW Suite A

Auburn, WA 98001

 

We are moving to a new address on May 20, 2019. We would appreciate it if you updated your records with this new address.

 

Please note that our phones and internet will be out of service throughout the day during our move on May 20, 2019. Phone and email communication will be affected by this. Online parts orders placed over the weekend or on May 20th may be delayed shipping by one day as we move our inventory and shipping stations to the new building. We apologize for the inconvenience. We will be back online as soon as possible and we are looking forward to the opportunity our new space will provide us to serve you better!

 

For customers familiar with our current location, the new location will be easy to find. We are directly across the street and one building over. Stop in and say "Hi!" when you get a chance!

 

New location

 

 

Posted in American Spray Technologies By AST

Texturing walls and ceilings has increased in popularity in both residential and commercial settings due to the decorative applications and patterns the material creates. Before beginning your texturing jobs, there are many factors that must be considered in order to achieve the desired texture and finish. Some of these essential considerations include the texture spray equipment used, nozzle selection, airflow setting, material flow setting and the actual material that is being applied.

 

One of the most crucial steps in texture spraying is mixing the material properly and paying close attention to its consistency throughout the duration of the job. In today’s blog, we will review some of the different types of texture material, pattern sizes, and helpful guidelines to keep in mind for mixing and equipment. Before you know it, you’ll be spraying texture like a professional in no time.

 

Common Types of Drywall Spray Material

Typically, drywall texture material can be purchased in a pre-mixture or powder form. No matter which type of material you are using, you must mix the material and thin it until the proper consistency is attained. This is a vital step to achieve the best finish in your spraying applications. Let’s expand upon the characteristics of the two types of texture compound.

 

Pre-Mixed Drywall Material

This drywall mud starts with a thick, paste-like consistency. Commonly found in a bucket or box that has everything needed. Keep in mind, most pre-mixed drywall material needs to be thinned to meet pattern criteria. This drywall material offers convenience and will require less mixing and less water to reach the desired consistency, but on the flip side, normally incurs a higher cost per coverage as compared to powder.

 

Powder Drywall Material

Powder drywall material is most commonly used for wall and ceiling texture application. This material will need to be thinned according to the manufacturer’s instructions as well as the contractor's preference for the desired pattern being sprayed. Powder or bagged material is used most commonly because of its lower cost compared to pre-mixed. An American Spray Technologies spray rig can mix this material up rather quickly.

 

Remember, generally, the thinner the drywall mud that you use, the more output and finer finish you will get. On the other hand, thicker drywall mud creates less output and a coarser finish.

 

Tips For Successful Drywall Spraying

Follow the tips listed below to help guarantee your success with drywall texture spraying jobs!

 

Use The Proper Mixing Tools

This one is simple for big rig owners as AST rigs have integrated mixing systems. If you are spraying with a portable unit such as the Kodiak M2, you will have to choose the right mixing tools in order to achieve the proper consistency. Using standard drills to mix the heavy drywall muds can risk damage to your equipment. When mechanically mixing material, it is best to use a heavy duty drill or a mixer designed exclusively for texture and drywall material that provides enough power to get the job done right.

 

Test Material Consistency

Mixing texture material to the right consistency is essential for a successful overall finish. An easy way to test the consistency of your material is by using your finger. After mixing, simply run your index finger through the material to determine its consistency. When the material does not fold back on itself and a line where your finger was is visible, this is an indicator that the material is too thick. Ideally, the material should fold back on itself, indicating you have a light to medium mixture.

 

Mix Material Frequently

As drywall material sits, it will begin to thicken. When material thickens it can slow down production and impact the consistency of your finish. Mixing the material frequently will help you maintain the proper consistency and aerates to keep the material fresh as you finish the job.

 

When applying drywall material, in addition to properly mixing and achieving the right consistency, using the right texture spray equipment is essential to the success of the job. That’s why many drywall contractors prefer using drywall spray rigs from American Spray Technologies. Our texture spray machines are designed to last and provide years of profitable use. We make only hydraulic controlled texture spray rigs, which provide infinite control of mixing speed and pump speed at your fingertips. This makes mixing a snap and adjusting your spray pattern a breeze! If you are interested in learning more about AST drywall spray rigs, contact our experts today!

Posted in American Spray Technologies By AST

When customizing any piece of equipment, price is always a significant factor. In fact, many people assume that anything "custom-built" is unaffordable or out of reach. The same goes for when you are customizing a texture spray rig for your drywall contracting business, or so it may seem. At American Spray Technologies, with our selection of texture sprayers, customizing your spray rig is by no means out of reach.

 

In this blog, we’ll debunk three of the most common myths regarding custom texture sprayers as well as highlight some of the more common modifications you might consider with your next sprayer purchase.

 

MYTH: Only Big Companies Can Afford Custom Spray Equipment

Truth: Customizing your American Spray Technologies equipment is recommended for companies of all sizes! In fact, you may be surprised that some of the most common features that drywall contractors request are very affordable. Some factors that can affect the cost of your custom spray rig include the tank size, engine and compressor size, upgrades to the pump, and whether you want the rig skid or trailer mounted. Other options, such as switch type (air or electric) and tip sizes do not affect the cost at all.


MYTH: Custom Texture Sprayers Require Intense Modifications and/or Upgrades

Truth: When customizing a spray rig, the power is in your hands. After 50 plus years of manufacturing and a focus on continued improvement, our standard designed spray rigs will provide years of reliable service and performance without the need for upgrades or optional equipment. However, some contractors require some smaller upgrades, such as a longer hose or a different spray gun. And some contractors need more power and a larger spraying capacity so they request a bigger power pack and bigger tank. Whatever your needs may be, we can help you find the right options.  Also, if you need help deciding what tank size is best for you, give us a call and we can run the numbers to help you figure out how many gallons you need.


MYTH: Custom Texture Sprayers Are Difficult To Come By

Truth: When choosing a leading manufacturer that specializes in creating custom spray rigs to meet the needs and requirements of client’s work, such as American Spray Technologies, acquiring the right sprayer for your business is just a few clicks or a phone call away. We have an online quote request system that lets you build your rig so we can put together a quote. It can be found here: Build A Rig.


And as always, we are available by phone at 253-833-4342 or email at info@sprayrig.com.


Now that we have handled some of these common myths associated with custom texture sprayers, let's review some examples of spray rig modifications that may enhance your equipment to meet the unique needs and specifications of your work.


  • Power and Air. Interested in a different size compressor or gas engine for your rig? AST has different configurations to choose from depending on your needs.

  • Hose Length. Standard big rigs are equipped with 125 feet of hose, but if your jobs require a longer hose, it's easy to add more length.

  • Rig Size. The size of your rig will significantly depend on the needs and requirements associated with your business. When customizing your rig with AST, you can choose from 150, 200, 270, and 350 gallon tanks. Electric units are also available in a 100 gallon size. We also offer a 16 gallon portable unit.

Building a custom rig can be one of the best investment decisions for your business. If you are interested in customizing a texture sprayer for your business, you can begin building your rig now! For assistance or more information, contact our sales staff.


Posted in American Spray Technologies By AST

As the busy season begins to wind down more and more, drywall contractors will likely be planning for the upcoming year, many of which have the goal to improve their business. Of course, improving the quality of their business doesn’t just happen, it generally takes work and effort. If you are a drywall contractor looking to improve your business this upcoming year, you’re in luck. In this blog, we’ll share some helpful and effective tips to increase your business!


Find Work By Networking

One of the best ways to find jobs is to network with others in the industry.  Networking can be a useful and effective tool to build brand awareness for your drywall business, generate leads, and find vendors. Additionally, being active and giving back to the community in which you serve is also a great networking opportunity for your business.


Make Customer Service A Priority

Client satisfaction should be a to priority. Of course, this does not mean you need to cave at their every demand. Instead, make an effort to actively communicate with your clients on all aspects of a project. This will help ensure that both sides can be equal partners in the decision-making process. Pleased customers will lead to repeat business and great referrals.


Be Proactive Instead of Reactive

In this line of work, you cannot expect work to just always fall into your lap. Instead, you should seek new opportunities top retain and grow your business.  Constantly reaching out to the homeowners, architects, and general contractors, or other parties that may have work will help you find out what projects they have on the horizon.


Invest in Better Equipment

Nothing is more problematic for your business than faulty equipment or equipment that does not meet the requirements and specifications of a job. For example, a new drywall spray rig can provide you with the power, durability, and portability that you need to enhance productivity and quality of work. Whether you are looking at buying new or used drywall texture spray rigs for sale, it's important you that you understand how to choose the right one.


Things To Consider When Investing In A Texture Spray Rig

  • Consider A Split Tank. Split tank spray rigs offer versatility and flexibility that a single tank option won’t provide. Split tanks allow you to mix two different types of wall texture, too.

  • Don't Skimp On Price. It is tempting to purchase equipment that saves your business the most money, but buying spray equipment based on price is not a great investment in the long run. Paying more for newer equipment and quality components from an industry-leading manufacturer will not only last longer, but it will likely require less maintenance. If you do choose to look for a used texture machine for sale instead, make sure you purchase it from an authorized seller that ensures the equipment is in good shape.

By following these helpful tips, you will be on your way to improving your drywall contracting business. If you are searching for a texture spray rig for sale, contact American Spray Technologies! Whether you want to invest in a trailer texture sprayer, electric spray rigs, spray skid rigs, or portable sprayers, AST has the equipment you need. Committed to manufacturing dependable sprayers that offer superior performance, AST rigs will reduce your job time and make spraying a breeze with powerful, reliable performance time after time. Plus, our equipment is designed to be easy-to-clean, low maintenance, and durable, enabling professionals to get through their texture jobs faster and more efficiently. If you are interested in learning more about our texture spray rigs, contact our helpful sales staff today!


Posted in American Spray Technologies By AST

How to Use Section 179 Qualified Financing


Section 179 provides a great opportunity to save money when you purchase a new spray rig and if you choose to finance your equipment, you may actually end up with more cash at the end of the year than you would have if you never purchased the equipment in the first place. How does this work? Section 179 allows you to deduct the full amount of the equipment in the current year, without paying the full amount for the equipment in the same year.

 

In the previous blog post, we met Craig, a drywall contractor that is thinking about purchasing a new spray rig. We calculated Craig’s tax savings when purchasing a $25,000 spray rig to be $8,750. If you want to see how we arrived at that number, click here to read the previous post.

 

Craig is excited about the idea of spending that money on equipment instead of on taxes, but now his biggest problem is that he doesn’t have the cash to pay for the equipment outright. The good news is that this is not actually a problem at all. In fact, taking advantage of Section 179 with financed equipment may save him more money in taxes in the first year than he would have to put into the equipment. Here’s how:

 

Example

Craig makes a deal with an equipment financing company. He has good credit and his terms end up being 0% down with monthly payments of $416. For the sake of the example, lets say Craig makes payments in every month of the first year. 12 payments at $416 per payment is $4,992 in the first year.

 

Below is the calculation we did in the previous post with this new financing deal added in:

 

Spray rig purchase: $25,000

Year 1 Write-Off (Section 179): $25,000

Normal Year 1 Depreciation: $0

Total First Year Depreciation: $25,000

Tax Savings (assuming 35% tax rate): $8,750

Payments made on loan: $4,992

Net Additional Cash in Bank After Year 1: $3,758

 

As you can see, Craig ends up with $3,758 more cash in the bank at the end of Year 1 than he would have if you never purchased the equipment at all. Instead of paying $8,750 in taxes, he paid $4,992 towards new equipment. In addition, he has $3,758 in the bank that he can use to grow his business even more.

 

If you are considering purchasing new equipment, now might be the time to give us a call to see how you can save the most money. We frequently work with financing companies that can help you take full advantage of Section 179 and improve your cash flow this year.

 

Call us at 877-833-4342 or text 253-833-4342 for more info. We are more than happy to provide a quote for a spray rig to see if it makes sense for your business!



Posted in American Spray Technologies By AST

 

Whether you are adding a portable spray rig to your already existing fleet, replacing old equipment, or are a first-time buyer, choosing the right equipment is important to your bottom line. With the right equipment, jobs will be easier, more efficient, and profits will rise. However, make the mistake of getting the wrong type of pump, or cheap, equipment and your money could be left on the table.

 

How To Choose The Right Texture Spray Rig

Done right, purchasing a texture spray rig can be very profitable. With all that is at stake, making this decision can certainly be a challenge. Luckily, we put together a guide that will help you choose the best texture spray rig for your work. To determine the best texture spray rig for your work, you must first take the time to consider and understand job requirements, as well as any future needs and goals. To help you identify these needs and requirements, consider the following questions.


What Materials Do You Use For Application?

The materials that you use will help guide you in choosing the best spray rig solution needed to get the job done. It is important to keep in mind that your answers to this question should not only be what you are currently applying today, but also what you may be used in the future — something that is important to remember when you are considering expanding your business to new applications with various materials. Do you use high viscosity, waterborne, or oil-based materials? Does the material you spray contain aggregates or require high or low atomizing pressure? These are just of the few questions you should take the time to consider.

 

How Many Gallons Are Used For Application?

Of course, the key to job productivity is properly sizing equipment. Having a good idea of how many gallons are used throughout the year,  factored with the production rate you desire, will help steer you in the right direction.

IMPORTANT: Be sure to avoid the common mistake of undersizing equipment. Undersized equipment will result in poor production rates and risk component failure and work stoppage.

 

What Type of Surfaces are Being Sprayed?

Don’t forget to consider the types of surfaces are used during applications. Whether you’re spraying drywall texture, EIFS, Fireproofing, Waterproofing, or pumping log home chinking, each has their specific needs when applying the desired finish. Considering the surface will help to understand tip sizes needed, as well as the flow required to support them.

 

Another consideration should be where the surface is located. Consider the following application questions.

  • Is it overhead?

  • Is it a horizontal surface?

  • Is it a vertical surface?

Considering these questions will help in choosing the best sprayer and accessories for the job.

 

What Hose Lengths Are Required For Application?

The length of the hose on your spray rig plays a significant role in application productivity. Since it can take time to haul equipment around a job site, it is important to select spray equipment that can complete the job with the appropriate amount of hose. Factors that affect the length of hoses include the materials being sprayed, the size of the tip, and the diameter of the hose. Ideally, equipment should be selected with appropriate specifications for pressure and flow that can support the required hose for the job and application.

 

What Types of Jobs Do You Contract?

Every job has its own requirements. Whether it’s new construction, remodeling, residential work, or commercial work, each job has different demands. This includes crew sizes, materials, and applications utilized, power available, etc. The conditions of job sites will also present different characteristics required, such as possibly requiring smaller equipment, extreme durability, zero emissions, and more.

Again, while understanding the current requirements, it’s once again important to consider future jobs —this may steer the contractor to a totally different spray solution that can fulfill all current and future job requirements.

 

As you can see, there are many questions and considerations when it comes to choosing the best texture sprayer for the jobs you do. It’s certainly not an easy decision, as you’ll want to choose a texture sprayer that can be used for present jobs as well as jobs in the future. Ultimately, you’ll want to look for a sprayer that is perfect for texture jobs, large or small, and designed for multiple spray applications. Seems to good to be true right? Perhaps it was before, but The Kodiak Texture Sprayer from American Spray Technologies has changed that.

 

 

Kodiak Sprayer - The Last Texture Pump You’ll Ever Need!

When choosing a portable textured spray machine, you do not only want equipment that is compact and easy to move around a job site, but you also want to choose equipment that is powerful. Typically most portable texture sprayers offer one or the other, but never both. However, the Kodiak texture sprayer from American Spray Technologies has set a new bar. For the past two decades, the Kodiak Texture Sprayer has been a popular choice for professionals who need a compact, easy to maneuver, texture spray machine. Designed to give you years of reliable performance and features such as increased hopper capacity, durability, and easy clean-up, this portable sprayer can be used for a variety of applications and materials.

 

 

The Benefits of the Kodiak M2 Spray Rig From AST

For the past 20 years, professionals looking for a compact, easy to maneuver, texture spray machine have put their trust in the Kodiak spray rig. And with the Kodiak M2 spray rig available, professionals have access to increased hopper capacity, durability, and easy clean-up features that are needed to ensure texture spray jobs are completed efficiently and effectively. Let’s take a look at some of the benefits offered by the Kodiak M2 texture machine.

 

Increase Capacity

Having extra capability can be key to future growth and opportunity down the road. Unlike most portable texture sprayers available, the AST Kodiak M2 is equipped with a 16-gallon high impact, texture hopper, ideal for larger jobs. In general, larger equipment tends to last longer and can also be more productive and forgiving with materials, however, with the Kodiak M2, you get the extra capacity without losing its compactness and ease of moving around a work site.

 

Enhanced Speed Control

Speed control is very important to get the quality drywall texture results that you expect from your spray machine. With this texture spray rig, professionals can easily set the desired speed with a turn of a knob, enabling professionals to have complete pump speed control.

 

Durability

Kodiak M2 spray rigs are built to last for years to come. The M2’s electronics are now enclosed in a watertight, cast aluminum housing. Plus, paired with the texture sprayers compact size, its extreme durability can make it useful in just about any job site conditions.

 

Increased Power

If you are tired of compensating for the shortfall of your current pump, the Kodiak drywall sprayer is the solution you have been searching for. With the capability of generating 300 pounds of pressure, this spray rig also provides both variable speed control and high pressure. You can pump a variety of thicker slurries that other sprayers would not be able to handle.

 

Protected By Warranty

Because AST equipment is designed for the ultimate durability, you can rest assured that if something were to be found wrong you will be protected by Kodiak’s Warranty. To learn more about the warranty of our Kodiak spray rig, contact our sales professionals today.

 

Ultimate Portability

Unlike other portable texture sprayers, the Kodiak M2 can be used for both large and small jobs. This sprayer can easily be moved around throughout a work site. This texture sprayer is easy to move around and can be reduced the size thanks to the collapsible handle.

 

Longer Hose

Often times, when jobs require a longer hose, it can affect the efficiency and flow of the rig. However, the Kodiak offers a solution that competitors cannot meet. Even with a longer hose, with over 300 PSI of pressure, this texture sprayer can put up materials quickly and efficiently, even with a longer hose.

 

Includes Hose, Pole Gun, and Tips

Unlike other texture sprayers, the Kodiak comes complete with equipment you need to do the job efficiently.

Included are:

  • Up to 70’ of 3/4” hose

  • Pole Gun

  • Two Tip Sizes (3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”)

  • Additional options are available to meet your specific needs

Hassle-Free Clean Up

This spray rig’s 16-gallon texture hopper is simple to remove for cleaning and transport.  The unique pump-housing design allows full access and disassembly by simply flipping two cam locks. Cleaning can be done in six simple steps:

  1. Release cam locks

  2. Slide out the pump

  3. Remove connecting drive shaft

  4. Clean

  5. Reverse steps to reassemble

  6. Re-install upper hopper

 

What Materials Can Be Used With The Kodiak M2 Drywall Spray Rig?

The Kodiak Texture Sprayer is designed to give you years of reliable performance for a variety of applications and materials. Some of the materials this unit can handle include:

  • Orange Peel Texture.  "Orange peel", refers to a texture technique that creates a soft, slightly bumpy surface, very similar to an actuaal orange peel. The technique is relatively popular due to its appealing look and ease of application.

  • Knockdown Texture. Knockdown texture is a heavy application of thicker mud and then knocked down with a knockdown knife.

  • Splatter Texture. Sometimes referred to as either splatter orange peel or splatter knockdown has less of a “machined appearance” and the droplet sizes vary from small to large, can be inconsistent in size.

  • Machine Brocade. Can also be referred to as a Spanish lace and traditionally sprayed on the ceilings in a stringy pattern with minimal air, then knocked down with a knockdown knife.

  • Chinking Material. Chinking refers to a flexible elastic sealant that resembles the appearance of the old cement which once was used to seal logs together. Today, chinking is also used for sealing joints between the logs, as well as any gaps, holes, and checking. The Kodiak, when properly configured is used to apply chinking.

  • Fireproofing Material. Kodiak sprayers and pumps can handle a variety of fire-resistant and fireproofing materials, examples would be MONOKOTE® MK-6 & CAFCO® 300

  • Elastomeric Materials. Elastomeric finishes are designed for extra flexibility. High levels of elastomeric acrylic polymers are formulated into the finishes to create a flexible coating with high movement capability.

Even if you don’t use some of the above materials in your current applications, they could be something that you expand into in the near future. With a sprayer that can handle various materials, this really is the last spray pump you will need!

 

 

What Others Are Saying About The Kodiak M2 Texture Sprayer

As mentioned before, Kodiak Texture Sprayers have been the preferred choice for professions that are in need of a compact, easy to maneuver texture spray machine. Let’s take a look at what some of our customers are saying about the Kodiak M2 Texture Sprayer:

 

“I've used the Kodiak for years. I also have a big rig. With the proper air source, this portable unit sprays as good as my big machine!” - Jason

 

As Jason mentioned, the Kodiak is a portable texture spray rig that is just as powerful as a large one. With the proper air source, you can get the power of a big rig with the efficiency and ease of use of a portable one!

 

"I could spray four units in two hours and 35 minutes with my airless.  Now, I spray four units in one hour and 20 minutes with the Kodiak" -Dave

 

The Kodiak M2 Is much more efficient than other texture sprayers. What’s more, you can control the speed with the turn of a nob. Plus, with 300 PSI of pressure, this compact texture sprayer puts up materials quickly and efficiently!

 

"I don't have to use stilts anymore since I switched to the Kodiak and my production went from spraying two apartments per day to four apartments per day" - Thomas

 

With a longer hose,  increased hopper capacity, durability, and power, the Kodiak sprayer can expedite your work, helping you finish jobs quicker and more effectively.

 

"You can't keep up with it. The biggest thing was reliability with my other pump — I had to rebuild it two to three times. With the Kodiak I have spent $20.00 for a switch in over six years" - Robert

 

American Spray Technologies texture sprayers and drywall equipment are designed to be durable to ensure you can get through your texture jobs efficiently. The Kodiak M2 has the durability to give you years of reliable performance for a variety of applications and materials.

 

 

Get Your Kodiak Sprayer Today!

AST texture sprayers and drywall equipment are designed to be easy-to-clean, low maintenance, and durable, enabling professionals to get through their texture jobs faster and more efficiently, and the Kodiak Texture emphasizes that standard. Whether you are adding a portable spray rig to your already existing fleet, replacing old equipment, or are a first-time buyer, the Kodiak M2 is one of the best options the market offers.

 

If you are interested in getting a Kodiak M2 Spray Rig, contact our helpful sales staff today!



Check out our other products!

Big Rig Trailers

Big Rig Electric

Posted in American Spray Technologies By AST

What is Section 179?

Oct 1, 2018 4:53:00 AM

What is Section 179?


Section 179 sounds like it is either a complicated tax code or a spot in the desert that the government uses to hide extraterrestrial activity from us. But the truth is, Section 179 is a simple incentive program that the IRS started to encourage small businesses to invest in equipment.

 

Without Section 179 in place, a business would depreciate the equipment it purchases over a period of years. For example, after buying a $25,000 piece of equipment, you may get to write off $5,000 per year for 5 years (these numbers are just an example). While you still reap some benefits of the tax write-off using this method, most businesses prefer to write off as much as possible in the current year, which is where Section 179 comes in.


Section 179 allows businesses to write off the entire amount of purchased equipment in the current year (up to $1 million in 2018). It’s one of the only tax benefits available for small businesses and its intention is to incentivize businesses just like yours to invest in equipment so your business can grow. In the example above with $25,000 of purchased equipment, instead of writing off $5,000 over a period of 5 years, you could write off the full $25,000 in Year 1. The big advantage is the drastic reduction in tax liability at the end of the year. Let’s break it down in a little more detail.


Example

Craig is a drywall contractor who has been spraying for quite some time now. His business has been growing lately and he is on the fence about purchasing a new spray rig to add to his fleet. Craig hears about Section 179 and is curious how it could benefit him. Let’s take a look at the impact of Section 179 on Craig’s potential purchase:


Spray rig purchase: $25,000

Year 1 Write-Off (Section 179): $25,000

Normal Year 1 Depreciation: $0

Total First Year Depreciation: $25,000

Cash Savings (assuming 35% tax rate): $8,750

Actual equipment cost after Tax: $16,250

 

Craig is able to write off the full $25,000 spray rig purchase, meaning his taxable income is reduced by $25,000. Assuming Craig has a tax rate of 35 percent, this means that he will be paying $8,750 less in taxes this year. Instead, that money is invested in the spray equipment.


Think of it this way: You can send $8,750 to the IRS in the form of tax, or you can drop that $8,750 into equipment. If your business is growing or your current equipment is slowing you down, it may make sense to give us a call to discuss what options we have for getting a new rig into your hands.


As always, we are available by phone at 877-833-4342 or you can text 253-833-4342.

 


It is also a good idea to consult with your accountant to work out the best strategy for your business.


For more information about Section 179, visit www.section179.org. They also have a handy tax deduction calculator. After you receive a quote from us, you can drop the quoted price into the calculator to see what your exact Lowered Cost of Equipment will be after the tax savings.



Posted in American Spray Technologies By AST

Customizing Your Spray Rig

Sep 19, 2018 2:01:02 PM

When you’re considering customizing any piece of equipment, price is always a factor. With the spray equipment from American Spray Technologies, though, customizing a spray rig is more affordable than you may initially think. You can easily create a custom rig with the modifications to meet your needs without breaking your budget. In today’s post, we are going to review three areas to consider when customizing a rig that could help benefit your business!


The Platform

The heart of a spray rig, the platform is typically the first decision you will need to make when building a custom spray rig. There are three different types of rigs to choose from: trailer, skid, and electric. Consider the needs of your business to better determine which platform is right for you. Let’s take a look at the three platforms:


Trailer Spray Rig

Trailer platforms are portable, compact, and easy to tow. AST quality trailer spray rigs require little maintenance and will give you years of efficient and profitable use.


Skid Spray Rig

Skid rigs are perfect for installing in box trucks or on flatbeds. These platforms are commonly used in cold-weather environments to keep the spray equipment warm.


Electric Platforms

Electric platforms are most commonly used for housing and high-rise applications. These are powerful, compact and portable - it can easily fit through doorways and elevators, which makes them perfect for multi-story buildings.


The Length of the Hose

The length of the hose plays an important role in the functionality and practicality of your custom spray rig. Typically, custom equipment will come with a high-pressure spray hose that lengths generally from around 125 to 150 feet. Depending on the type of projects you work on, and keeping long-term use and business growth in mind, extending the length of the hose for your custom rig may not be a bad idea!


The Spray Gun

The right spray gun can make applying texture to walls and ceilings easy. When considering gun types for your custom texture spray rig, it is important to know more about the quality of the finish, production, compressed air, and viscosity of your texture material to better determine which is the best fit. You’ll also need to know the difference between an air-switch gun and an electric-switch gun. Typically, airless sprayers are commonly used for outdoor spraying applications because of more overspray and loud noise as compared to HVLP sprayers. In contrast, air sprayers can do the detailed and precise job with little overspray and almost no noise.


The Pump

The pump is the heart of a spray rig, and choosing a pump is an important part of the customization process. Pumps are used to transfer a variety of fluids and are an economical choice for professionals in a variety of spraying applications. At American Spray Technologies, we have a variety of pumps to choose from when building your custom spray rig. Whether you are looking for a pump that can handle more corrosive materials or one that can handle more power, ATS has the solutions you are looking for.


Ready To Build Your Custom Texture Spray Rig?

Building any piece of custom equipment can be difficult, but at American Spray Technologies, you can easily Build A Rig with the help of our industry experts. To learn more about our texture spray rigs or to receive a quote for your custom equipment, contact us!


.


Posted in American Spray Technologies By AST

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3
Set Ascending Direction